Original Xhorse Tools On Xhorse.co.uk

Xhorse VVDI2 incorrectly calculates ISN in BMW EDC17CP09 in ECU/CAS ISN -  E-Series ISN - EDC17x(16 Bytes)!!! After reading eeprom ECU using K-TAG in VVDI2 - File Make Key - CAS3+ (0L15Y, 0M23S) - Make Dealer Key - Have ECU dump file / no problem and gives the correct ISN. There is an offset of 8 bytes to the beginning of the data. The last two pictures show everything. Guys from Xhorse, fix it. Thanks to @ urshul feedback. Update! Failure with VVDI2 again. VVDI2 - Transponder Programmer - Euro - Mercedes Benz - Car-All Masksets - universal maker and old MB W210 with immo 5WK4 688 MC68HC705X32 (0D53J). When uploading a file, we get an error: Unknown version! Original Tango downloads this file without any problems and makes a transponder! Guys from Xhorse, fix it. Reply: I talked to their support about this before, a lot of brands on the transponder programmer part are doing that, if not all, it only works if you read the dump with vvdi prog or key tool plus or mini prog, dumps tha...

How to pair Wifi to APP and install Updates to Xhorse Mini Prog Programmer in step-by-step.  Let's start.  With Wifi connected to your phone or Xhorse Key Tool Max , pair your device to the Mini Prog to begin.  Select "More Functions", and then "Connection Mode" and Wi-Fi connection". Then, select pair button at the top left of the home screen and your device from the list.  Allow location permissions and enter your Wifi Information. Once connected, select the pair button again and allow Bluetooth connection. When synced, begin and install all available updates. Tap "Update" at the bottom of the machine, there is available with APP update, firmware update, database update, just click them one by one to update.  Okay, Xhorse Mini Prog software update successfully!