Original Xhorse Tools On Xhorse.co.uk

Xhorse XDKR00GL Key Reader is able to decode VW Jetta HU66 key bitting successfully. This is a quick demo to show how easy and fast it can do. Turn on Xhorse Key Reader power button. Open Xhorse app on a smart phone: Optical identification >> Volkswagen >> all key blank >> HU66 8 bitting >> OK >> Connect >> Select Key Reader SN to After a successful connection, press button to place key into key hole. Please noted to vertically put it down. Press button to close. Identification >> Identification Key Reader Blade Skimmer starts identifying automatically... Surprisingly, it has completed in seconds. Biting codes: 13432131 That are all correct. Now you can go on to cut keys with Xhorse Key Cutting Machines directly. This is how to use XDKR00GL Key Reader to decode VW Jetta HU66 successfully. http://blog.xhorse.co.uk/how-to-decode-vw-jetta-hu66-key-with-xhorse-key-reader/

Problem1: I have tried 5 XKB506EN Wired Remotes to generate a 5K0-837-202-S chip. The instruction says wired remote is okay, but it always failed and prompted: "Burn failed. Please put in X wire remote, XN wireless remote, or XT superchip-remote." What's the problem? Isn't the XK series remote workable? Problem2: I have met the same problem when generating Sorento OSLOKA-910T 433 chip with Xhorse VVDI Key Tool Max Programmer . Any ideas? Please help! Solution 2 tips to be noted when generating XK remotes 1) Put circuit board vertically into the coil. 2) Please remove the battery, and connect XK remote via cable to generate. Many users are installing the battery on XK Wired Remote to generate, that's why caused failed issue. Hope this is helpful. Technical support: http://blog.xhorse.co.uk/solution-xhorse-wired-remote-burn-failed-on-vvdi-key-tool-max/