Original Xhorse Tools On Xhorse.co.uk

This is an operation instruction on how to use Xhorse VVDI BMW BIMTool Pro tool to repair CAS module via OBD/ EEPROM. 1. OBDII - CAS1 Repair For suddenly condition cause CAS1 enter service mode while reading CAS1 EEPROM via OBD2 or CAS PLUG, you can select this option to repair. 2. OBDII - CAS3+ ISTAP Repair For suddenly condition cause CAS enter service mode while update ISTAP*, select this type to repair. You need to know CAS ID before continue. You can input the CAS ID or load EEPROM to read CAS ID. Use the known CAS ID to repair: use this way if you have recorded CAS ID before updating CAS flash. Use the CAS EEPROM to repair: use this way to repair if cannot read CAS ID. You need to have the CAS EEPROM dump file. 3. EEPROM Repair (CAS1, CAS2, CAS3, CAS3+) Support loading EEPROM dump file in service mode, then automatically repair the service mode status and save the new EEPROM dump file. Steps: 1. Load the EEPROM dump file that needs to be repaired, and it prompts that you need to...

Xhorse XDRT20 Frequency Tester can support to detect different frequencies, like 315Mhz, 433Mhz, 868Mhz, 902Mhz and other major frequency bands. This is a quick guide on how to use Xhorse XDRT20 to test frequency. 1.Open the back cover to install 2 batteries, turn on the XDRT20 tester. 2.Press any button of key to detect: 1)When key frequency is in the range of 430-436MHz, the yellow light will flash; 2)When the key frequency is in the range of 305-320MHz, the green light will flash; 3)When the key frequency is 868MHz, the red light will flash; 4)When the key has infrared, the IR white light will flash after frequency light in sequence. Video Guide: More info about Xhorse Frequency Tester V2 to be update... www.xhorse.co.uk