Original Xhorse Tools On Xhorse.co.uk

If you've received the new Xhorse Multi-Prog , but find that there's no response when connecting to the computer. The software shows the device is not connected. Don't worry, that's because you haven't installed the Multi-Prog driver yet. Just follow the steps below. For the Win10 system, the driver will be installed automatically. So you don't have to worry about it. For the Win7 system, we need to install the driver manually. 1. Connect Multi-Prog programmer to computer. 2. Open software: Help >> Install the driver >> Multi-prog device There will be a popup. *If it's blank, it means the device is not recognized. At this time, we need to re-plug the device or change the port until a multi-prog device appears here. 3. Click small arrow to find the "USB Serial(CDC)" driver, start the installation. The driver was installed successfully. We can see that the device status becomes "connected". *If the installation fails, we need...

This is the Xhorse Multi-Prog Programmer operation manual on how to read and write EEPROM. Read this article carefully to learn for a start. What's EEPROM? EEPROM is a memory chip used to store various electronic information data of the vehicle. The storage capacity of the memory, ranges from a few hundred bytes to several hundred megabytes. The Xhorse Multi-PROG provides a variety of interface connection methods to read and write chips. Run the software on the PC to enter the memory function menu, you can select the corresponding options by EEPROM manufacturer and specific model. At present, the device covers almost all the common types of EEPROM chips that can be used in automotive electronic modules. The device supports reading serial interface and parallel interface of various types of EEPROM(some parallel interface memory requires special adapters). EEPROM Model &Mask Query After entering the specific chip brand menu option, the Multi-PROG software will display all memor...