Original Xhorse Tools On Xhorse.co.uk

This tutorial is on how to program the Mercedes-Benz W204/W207/W212 Steering Lock Emulator with Xhorse VVDI Key Tool Plus step by step. For example, here's taking an ESL/ELV emulator that has not been programmed yet. Step1. Save EIS Data Immo programming >> Benz >> Select from system >> EIS Tools >> Start programming >> Auto Detect(CAN) >> Read the lock(EIS) data >> OBD >> Save Save the data file. Step2. Calculate Password Password calculation >> Start programming >> Data acquisition >> Add a key >> W212(with ELV) >> Process Wizard mode >> Start Insert "working key" to "EIS" before pressing OK. Take the car key out of the ignition switch and click OK. Insert "working key" to "EIS" before pressing OK. If a car with the Keyless Go function can not finish synchronizing, please try the following step: Insert key and start engine -> switch OFF -> switch ON ...

Problem: Why the XHORSE Multi-Prog Software prompt: "Not connect to the device, please check and try again!" What's the reason? Am I misconnecting? Please help. Solution 1. Check if the device connection is correct. 2. Check if the driver was installed successfully. In general, the Multi-Prog driver will automatically install with software. If not, please install it manually. Help >> Install the driver >> USB Serial(CDC) After installation, check if the Task Manager can recognize the driver. 3. If none of the above work, please contact Xhorse for help. www.xhorse.co.uk