Xhorse Key Tool Plus Program Benz W204/W207/W212 Emulator

This tutorial is on how to program the Mercedes-Benz W204/W207/W212 Steering Lock Emulator with Xhorse VVDI Key Tool Plus step by step.

For example, here's taking an ESL/ELV emulator that has not been programmed yet.

Step1. Save EIS Data

Immo programming >> Benz >> Select from system >> EIS Tools >> Start programming >> Auto Detect(CAN) >> Read the lock(EIS) data >> OBD >> Save

Save the data file.

Step2. Calculate Password

Password calculation >> Start programming >> Data acquisition >> Add a key >> W212(with ELV) >> Process Wizard mode >> Start

Insert "working key" to "EIS" before pressing OK.

Take the car key out of the ignition switch and click OK.

Insert "working key" to "EIS" before pressing OK.

If a car with the Keyless Go function can not finish synchronizing, please try the following step: Insert key and start engine -> switch OFF -> switch ON

Insert "working key" to "Device IR Reader" before pressing OK.

Insert "working key" to "EIS" before pressing OK.

Insert "working key" to "Device IR Reader" before pressing OK.

Click OK to save collection data.

Acquisition finished, upload the saved data with "Upload Data" for password.

Upload success!

Key Tool Plus has calculated the password.

EIS Tools >> Start programming >> Auto Detect(CAN) >> Read the lock(EIS) data >> OBD

The password of the lock is detected. Press Yes to save it to the EIS file.

Step3. Write EIS Data

ESL Tools >> Start programming >> OBD - W204, W207, W212 >> Write direction lock(ESL) data >> Load the lock(EIS) data/Motorola EEPROM file >> OK >> Write direction lock(ESL) data

Whether to enable automatic clearing of TP and setting personalization? Yes 

Confirm the SSID.

Confirm the key password.

Press Yes to write the following data, writing data, please wait...

Writing data success.

The emulator has been programmed successfully and is ready to use.

www.xhorse.co.uk